Engineered for life safety!

Hanging Kits

 

The Hanging kit consists of a variety of fixing components served to offer the option of fitment to common construction materials which may require the installation of suspended means of escape signs.

ZHOOKS/CLIPS​

Ideal for directly hanging JALITE signs that do not require frames. The best way to suspend any JALITE photoluminescent rigid sign is to measure 25% of the sign’s over length in from each side and make a small drill hole (4mm diameter) spaced 5mm from the top of the sign. Easily adjust the spring steel wire to the desired height by pulling down.

suspend signs

 

SPRING LOADED 
HANGING WIRES​

Description:

  • 2 x Extendable spring steel wire.
  • Simply pull out to required length and it remains.
  • Easily suspend signs at the exact height required.

Size: 165mm Extendable to 1200mm.

Maximum Weight: 0.25kg.

ZHOOKS/CLIPS

SQUARE ADHESIVE
CEILING CLIPS​

Description:

  • 2 x White plastic square ceiling clips.
  • Comes with self adhesive back.
  • Fast and easy sign installation.

Size: 19mm x 19mm.

SQUARE ADHESIVE CEILING CLIPS​

 

 

 

 

 

CEILING GRID
HOOKS​

Description:

  • 2 x White plastic ceiling grid hooks.
  • Fits securely to office grid ceilings.
  • Secure and easy to fit.

Size: 15mm x 19mm.

CEILING GRID HOOKS

 

 

 

 

HANGING KIT 1​ 

JALITE Hanging kit 1 has been designed to offer a one stop solution to accommodate a range of common environments encountered when siting escape route signs. 

Each combination that the kit offers is designed for use with the range of JALITE means of escape signs, and tailored to facilitate common installation conditions where signs are typically required to be sited. 

The Hanging kit consists of a variety of fixing components served to offer the option of fitment to common construction materials which may require the installation of suspended means of escape signs

Code: Hangingkit1​

Designed to effectively hang/suspend safety signs within typical environments; plastered/flat ceilings, office ceilings (incorporating ‘grid’ systems), and warehouse constructions using structural steel members.

Description:

  • 2 x Self adhesive galvanized steel ceiling pads.
  • 2 x High strength ceiling magnets.
  • 2 x Ceiling grid clips.
  • 6 x Hanging wires in three sizes [100mm, 250mm & 500mm].
 Hangingkit1​                                                                                                                      

HANGING KIT 2 

FOR SUSPENDED CEILING GRIDS​

Code: Hangingkit2​

Description:

  • 2 x 1m Steel wire.
  • 2 x Nickel plated collar.
  • 2 x Nickel plated cable clamp.
  • 2 x Nickel plated disk cover.
  • 2 x Ceiling grid clip.
 Hangingkit2​        

HANGING KIT 3 

FOR FLAT CEILING ATTACHMENT​

Code: Hangingkit3​

Description:

  • 2 x 1m Steel wire.
  • 2 x Brass holder.
  • 2 x Brass cable clamp.
  • 2 x Ceiling cap.
  • 2 x Panel clamp.
 Hangingkit3

HANGING KIT 4 

FOR FLAT CEILING ATTACHMENT​

Code: Hangingkit4​

Description:

  • 2 x 1m Steel wire.
  • 2 x Brass holder.
  • 2 x Brass cable clamp.
  • 2 x Ceiling cap.
  • 2 x Nickel plated cable clamp.
 Hangingkit4​